Whirlpool’s known for its high-quality appliances, including washers. But even the best machines can have issues over time, like when your Whirlpool washer’s not spinning. Don’t fret! In this blog, we’ll go over common causes of this problem, troubleshooting tips, and some maintenance tricks to keep your washer in tip-top shape.
Common Causes of Whirlpool Washer Not Spinning
A few things could be causing your Whirlpool washer not to spin, including:
- If your washer isn’t getting power or has a faulty circuit, it won’t spin.
- The drive belt, motor, or transmission problems can also stop your washer from spinning.
- Clogged drain hoses, a faulty drain pump, or a malfunctioning control board could be the culprit if your washer can’t drain water and won’t spin.
Troubleshooting a Front Load Washer
If you have a front-load Whirlpool washer, try these steps to troubleshoot the issue:
Check the Door Latch: Make sure the door is securely latched and not blocked by clothing. If the door isn’t securely latched shut, the washer won’t spin.
Verify the Wash Cycle Settings: Double-check that you’ve selected the correct wash cycle and haven’t overloaded the machine.
Check the Drive Belt: Look for damage or breaks in the drive belt. If it’s damaged, replace it.
Examine the Drum Bearings: Give the drum a spin by hand to check for smooth movement. Worn-out bearings will prevent your washer from spinning.
Reset the Washer: Unplug your washer for a few minutes and then plug it back in.
Troubleshooting a Top Load Whirlpool Washer Not Spinning
If you have a top-load Whirlpool washer, follow these steps to troubleshoot the issue:
Check the Lid Switch: Ensure the lid is closed properly and the lid switch is working. If it’s not, your washer won’t spin.
Verify the Wash Cycle Settings: Check that you’ve selected the right wash cycle and haven’t overloaded the machine.
Check the Drive Belt: Look for damage or breaks in the drive belt. If it’s damaged it will need to be replaced by a professional.
Examine the Drum Bearings: Give the drum a spin by hand to check for smooth movement. Worn-out bearings will prevent your washer from spinning.
Reset the Washer: Unplug your washer for a few minutes and then plug it back in. This could do the trick!
How to Maintain Your Whirlpool Washer
Prevent issues with your Whirlpool washer by giving it regular TLC with these tips:
- Wipe the drum, door, and rubber gasket regularly with a damp cloth to prevent dirt and debris build-up.
- Use the recommended detergent for your Whirlpool washer to avoid damaging the machine.
- Properly balance your load to prevent the machine from getting off-kilter and not spinning.
If you continue experiencing issues with your Whirlpool washer not spinning, call the Whirlpool washer repair experts at Twin Appliances.
